January 9, 2024, Ghost Ranch- Little things are often huge.

 The biggest thing I did today was a tiny one-bordering an area that was 1/5″ wide, 15′ from ceiling to floor. This was prep for the caulking of a small gap. Otherwise, I was running an oscillating sander to smooth the walls we will paint. Speaking of the sander. It has two handles for a reason. Hold onto both, when operating a sander, much as you would with a chainsaw. Unplug the tool, before changing the sandpaper.

Not enough can be said, in renovating, as in living, for a place for everything and everything in its place. It’d be all too easy to leave rolls of masking tape, boxes of screws, hammers, screwdrivers and cardboard boxes lying in any old spot. I am a control freak, in that regard, tending to foresee a co-worker falling on the floor, if the area is not kept clear.

Turning a sink upside down is the best way to trace its outline on a paper template, for matching sink with countertop. Those who try to just push the sink into a cut-out countertop have been known to waste $150. My co-workers turned the sink upside down and traced its outline on the template. Tomorrow, they will match sink with countertop, in the only way that works.

When cleaning a paint brush, use a painter’s comb, running it through the brush, whilst rinsing it under warm running water. Then scrub the handle, brush girdle and the brush fibers with a wire scrubber. Clean all the paint, even that which was left from previous projects, off the brush. Scrub the stir stick with the wire scrubber, the same way. Include the sides of the brush handle and stir stick, in this cleaning. Pat the brush and stir stick dry, before using them again.

These are things one can learn from a master craftsman. These are things that I once knew, but needed to be reminded. These are things that are among those that I need to know, if the direction I sense my life is going, is what pans out. It was a good day.